please go to our ISF page. Unique Tips Developed the M-TLV Grayscale Calibration Report Version 4.0 report format that better conveys to the customer their set's grayscale performance before and after

fixing a problem, learning about ISF calibrations, finding a calibrator, or looking for HDTV discussions, HDTV talk, HDTV forum or HDTV topics important to you, Keohi HDTV is here to help you. All visitors

Colour 6500k ISF / M-TLV Calibration Report Template Customer: Display: 0.313 0.329 0.313 0.329 IRE Pre - X Pre - Y Distance to D6500 Bias-Tint Post - X Post - Y Distance to D6500 Bias-Tint % Closer

updating the values in the service mode that he and his ISF technician wrote down but now TW3 is only half a screen. The top half is present and the bottom half is black as if he had PiP enabled but now

Maybe ISF can adjust it some more. I also saw ghosting on the top of horizontal lines. That is much more noticeable, and is visible while watching normal programs. I had been able to adjust the Mits sharpness

It’s all ISF’d since I am an Imaging Science Foundation certified calibrator as well as a trainer/teacher of this stuff these days. Packaging: The unit came from Best Buy and just looking at the multicolored

I would dare say that anyone who has invested into ISF calibration and then buys this switcher will be wasting their money. It throws the picture out that much. This is a $350.00 switch that SHOULDN'

ISF / M-TLV Calibration Report Customer: Display: 0.313 0.329 0.313 0.329 IRE Pre - X Pre - Y Distance to D6500 Bias-Tint Post - X Post - Y Distance to D6500 Bias-Tint % Closer to D6500K 100

Now you need to bring in an ISF certified person to calibrate the grayscale properly using a colour analyzer. Read the background info on this procedure. Excerpts from a thread on this technique (

please go to our ISF page. General Tips Cantilever Technique (Red Blooming Fix) Tighten up the blue line during convergence Sequence of Tweaks Danger - SLin, CLin, etc. (Convergence) SVM Tips Screen

I'm sure if a ISF Tech. reads this, he will die laughing or pull his hair out at this primitive suggestion. There is no doubt that it would be much , much better to enlist his services!!! I use an 18

I'm not an ISF technician, but I do consider myself to be more technology-literate than the average Home Theater user: Make sure electronic static convergence is set to 0 for all CRT's before mechanical

I had the grey scale done by an ISF tech. The test pattern was dead on but flesh tones are TOO RED. I undersatnd this is the result of a not so great color decoder (many push too much red). It could also

If you're not, make a call to your local ISF tech and beg him to do this while calibrating your set. One or two procedures could benefit from having a 2nd set of hands due to the bulky size of the rear

and Toshiba is using the arrow to point it out to ISF technicians (who always disable SVM). At first, I tried just removing the 123 connector from the main board. However, I found that doing so did not

I gave the TV a semi-complete ISF’ing. I did a full convergence and geometry check and fixed up the E-focus and the M-focus. I also lens stripped the three crt’s to even out the colour shift across

Check out the Brochure from Toshiba << Cheers, Leo Vildosola ISF Certified Calibrator Contents © Copyrighted by Keohi HDTV. All rights reserved.>

blank field for the new setting should you or your ISF person decide to change them. Please email me if you'd like a copy. *****Name Orig (Hex) Function Notes RCUT 45 Red Cutoff GCUT 40 Green Cutoff

Or your next call will be to an ISF grade tech, possibly necessary to import, to straighten out and realign your grayscale. Be advised that you are taking your life in your hands--or at least the life

I'm sure if a ISF Tech. reads this, he will die laughing or pull his hair out at this primitive suggestion. There is no doubt that it would be much , much better to enlist his services!!! I use an 18